Schmitz 114.9600.0 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 88

Schmitz 114.9600.0 Скачать руководство пользователя страница 11

Instructions for use arco-matic 200 M / 300 M - Version 2018-05-08 GBR ID no. 2038823A

11

Features

arco-matic 200 M / 300 M is an adjustable examina-
tion and treatment chair for use in gynaecology .

Operation

The examination and treatment chair can be adjusted
with a foot control or hand control. Four memory
buttons are available for this purpose , with which the
positions of all available adjustment features can be
saved.
For version-specifi c features, see Tab. 4.

Accessories

The integrated double castors (article number
101.0466.0, optional ) can be locked or set to a drive
mode for “quick forward drive/rotation on its axis” or
“easy mobility in all directions”.

The head cushion (article number 101.0472.0,
optional) is fi xed to the head pad magnetically. It can
be adjusted by 560 mm  in a longitudinal direction
and 250 mm  in a transverse direction.
During the adjustment of the examination and treat-
ment chair, the rinsing basin remains in a horizontal
position automatically. It measures 325 mm × 175 mm
(depth: 65 mm) and can be removed.
Paper rolls with a width of 400 mm  and 500 mm  can
be inserted. The diameter of these paper rolls may
not exceed 140 mm . The mount for the paper roll is
enclosed on all sides and thus protected against dirt.
Some models feature LED lighting. This LED lighting
comes on as soon as the examination and treatment
chair is connected to the mains and switched on. If
the LED lighting is not required, it can be switched
off  by a maintenance engineer.

Feature

arco-matic 200 M

arco-matic 300 M

Seat height adjustment

present

present

Back section adjustment

present

present

Foot support adjustment

not present

present

Number of storable memory positions

4

4

Tab. 4
Version-related features of the examination and treatment chair

«
...
9
10
11
12
13
...
»

Содержание 114.9600.0

























































































Отзывы:

Нет отзывов