Schmitz 114.9600.0 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 88

Schmitz 114.9600.0 Скачать руководство пользователя страница 44

44

Instructions for use arco-matic 200 M / 300 M - Version 2018-05-08 GBR ID no. 2038823A

Side rail accessories

This chapter summarises how to assemble and
operate the moving product parts that can be
ordered as optional extras to the standard compo-
nents and which can be attached to the side rails.

DANGER!

Risk of serious injury!
Every accessory has its own permitted patient
weight, which may diff er from that of the exam-
ination and treatment chair. Do not place any
load on the examination and treatment chair and
accessories that exceeds the lower of these two
values! Overloading can cause parts of the patient’s
body to suddenly fall off the table. This could prove
life-threatening, especially during treatment!

DANGER!

Risk of serious injury!
Poorly attached, worn or damaged accessories
can suddenly come loose during use, leading to
life-threatening situations.
For this reason, when mounting accessories always
ensure that they are properly attached, and review
the condition of the accessory.

Arm rest (101.0019.0)

Information about safe use of the arm rest can be
found in the accompanying instructions for use for
the arm rest.
There must be side rails on the back section (article
number 101.0465.0) to fi t the arm rest.

«
...
42
43
44
45
46
...
»

Содержание 114.9600.0

























































































Отзывы:

Нет отзывов