Schmitz 114.9600.0 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 88

Schmitz 114.9600.0 Скачать руководство пользователя страница 66

66

Instructions for use arco-matic 200 M / 300 M - Version 2018-05-08 GBR ID no. 2038823A

Technical Service

When asking service questions, always state the
following numbers, which appear on the identifi ca-
tion plate of your product:

•

the model number (on the identifi cation plate

after “REF”) and

•

the serial number (on the identifi cation plate after

“SN”, if present).

See chapter “Identifi cation plate” on page 70 for
the location of the identifi cation plate. If the identi-
fi cation plate is damaged, please contact Technical
Service at SCHMITZ u. Söhne.

Faults and repairs

In the event of malfunctions, please contact your
dealer, or call Technical Service at SCHMITZ u.
Söhne GmbH & Co. KG directly. Only personnel
authorised by the manufacturer may carry out
repairs on SCHMITZ u. Söhne GmbH & Co. KG prod-
ucts. Unauthorised intervention with your product
voids the warranty.

Technical service contact details

Telephone:

+49 (0) 2377 84 5 49

Fax:

+49 (0) 2377 84 210

Email:

[email protected]

WARNING!

Technical works on the examination and treatment
chair may give rise to personal injury if patients are
positioned on the examination and treatment chair
while the works are performed.
Accordingly, no repair works may be performed
while the examination and treatment chair is in use.

Replacement parts

Replacement parts can be ordered from your author-
ised dealer or directly from Technical Service at
SCHMITZ u. Söhne GmbH & Co. KG.

Inspection and maintenance

Careful handling, inspections and maintenance
preserve the permanent functional safety and oper-
ational reliability of this product. Inspections also
minimise the risk of faults.
Maintenance should be performed every two years.
Maintenance may only be performed:

•

by the service personnel of SCHMITZ u. Söhne

GmbH & Co. KG, or

•

by personnel duly trained and authorised by

SCHMITZ u. Söhne GmbH & Co. KG.

In order to guarantee that all features will be
available and to extend the product’s service life,
SCHMITZ u. Söhne GmbH & Co. KG recommends
a maintenance contract. The maintenance contract
guarantees that maintenance will be performed on
your product by SCHMITZ u. Söhne GmbH & Co. KG
maintenance personnel. The scope of maintenance
includes inspection and electrical safety testing in
accordance with IEC 62353:2014.

DANGER!

During its use, this medical device comes into
contact with materials that carry pathogens or
harmful substances (e.g. body fl uids). During repair
works, minor injuries in particular can lead to infec-
tions.
For this reason, thoroughly clean this medical device
prior to maintenance!

«
...
64
65
66
67
68
...
»

Содержание 114.9600.0

























































































Отзывы:

Нет отзывов