manualshive.com logo in svg

Schmitz 114.9600.0, Инструкция по эксплуатации, Страница: 50 / 88

Поделиться
Скачать
Schmitz 114.9600.0 Скачать руководство пользователя страница 50

50

Instructions for use  arco-matic 200 M / 300 M  - Version 2018-05-08 GBR   ID no.  2038823A 

Replacing the leatherette cover (optional, 
101.0473.0 )  

The leatherette cover can be removed for cleaning or 
replacement.  

 

Unzip the leatherette cover. Pull off  the leather-

ette cover.

 

Place the new leatherette cover over the leg 

support stirrup. Thread the zipper.

 

Pull the leatherette cover over the leg support 

stirrup and smooth it down. 

 

Zip it closed.

 

Turn the leatherette cover until the zipper faced 

down.

  

Fig. 68 
Mounting the leatherette cover
1) Leatherette cover
   

Protective cover for   foot supports  (101.0475.0 ) 

The foot supports can be protected against dirt by a 
cover. 

Mounting

 

Open the protective cover slightly. 

 

Pull the protective cover over the foot supports.

Fig. 69 
Protective cover for the foot support     

Содержание 114.9600.0

























































































Отзывы:

Нет отзывов