Commissioning
18
Operating Manual ProNumeric XCI 600 Version 07/16
4.2
Installing MULTIPROG, Schleicher add-ons, OPC server, and EC-
Engineer
Important!
The programming software consists of the MULTIPROG 5.x software
components, the OPC server, Schleicher add-ons for MULTIPROG and
the Schleicher Dialog.
EC-Engineer is not a part of the software package.
Before continuing with the commissioning process, all software
components must be installed one after the other in the order
described below.
The programming software can be installed both on an external PC as
well as on the PC of the control system. The following section
describes the installation process on an external PC.
If ordered by the customer, the controller will be delivered with two CD-
ROMs:
Table 2:
Contents of the CD-
ROM
Name
Contents
MULTIPROG
MULTIPROG programming software
OPC Server
Service Pack
Controller software for all Schleicher control units
Schleicher add-ons for MULTIPROG
Schleicher Dialog
Other tools such as documentation and service information
OPC Server