Operation
Operating Manual ProNumeric XCI 600 Version 07/16
49
6
Operation
6.1
Multi Function Application (MFA)
The MFA tool provides a means for adjusting the behaviour of the controller
during start-up
and forms the basis for operating the controller.
6.1.1
Starting the Schleicher MFA
The Schleicher MFA starts automatically when the controller is booted up,
and it is then placed into the system tray of the taskbar (see: Figure 62). If
the MFA programming window is not visible, it can be viewed by double-
clicking the blue Schleicher logo.
Figure 62:
Taskbar with
Schleicher logo
6.1.2
The MFA window
Figure 63:
The MFA window
(1)
Menu
For an explanation, see "MFA functions".
(2)
Message area
With information on memory, real-time operating system and
controller software.
(3)
Buttons
(4)
Status
Information on PLC status.
