First Steps with MULTIPROG
44
Operating Manual ProNumeric XCI 600 Version 07/16
Figure 48:
Inserting a second
master module.
The second master must be given the same IP address as the first. If you
have entered the address, select the master with <Select> out.
Figure 49:
Assigning an IP
address to the Master
Module.
Only after the above steps have been completed, should you browse
through the EtherCAT network again for the inserted slave modules.
Figure 50:
Browsing EtherCAT
network.
The new slave module was detected and inserted in the area of the second
master.
Figure 51:
Newly inserted slave
module in the
EtherCAT network
Mark the new slave module and copy it with the right mouse button.
