First Steps with MULTIPROG
Operating Manual ProNumeric XCI 600 Version 07/16
43
5.4.2
Alteration to the EtherCAT configuration when the topology is changed
This Use Case is described separately, otherwise changes in a configuration
as described in section 5.4.4 may be lost.
Figure 45:
EtherCAT
configuration when the
topology is altered
In the event that the topology is altered, the ENI file must be deleted at this
point.
Figure 46:
EtherCAT
configuration, deleting
the ENI file
After completing the steps that you already learned from section 5.4.1, start
the EC-Engineer.
In order to avoid losing the alterations in the existing master, it is necessary
to temporarily introduce another master. To do so, successively click <File>
and <New Master Module> to insert the new master.
Figure 47:
Inserting a new master
module.
The new master had now been inserted into the configuration.