Commissioning
28
Operating Manual ProNumeric XCI 600 Version 07/16
After confirming with <
OK
>, the connection to the XCx 600 controller is
called via <
Online> <Project control>
and then button
Info
in the
Resource
window (see: Figure 16).
Figure 16:
Calling the connection
to the XCI 600
controller in
MULTIPROG
When the 'Resource:Resource' window opens (see: Figure 18), this
indicates that a connection has been established. The window can be closed
again.
In the case of a faulty connection, the window does not open and
Timeout
(see: Figure 17) is reported. In this case, check all the settings again
(see: section 4.3) or consult the network administrator for assistance.
Other settings may have to be considered for the subnetwork determination
for gateways.
Figure 17:
Resource window
when there is NO
online connection
to the XCI 600
controller