First Steps with MULTIPROG
Operating Manual ProNumeric XCI 600 Version 07/16
47
Start the EC-Engineer.
Figure 57:
Starting the EC-
Engineer to alter the
names of variables.
Select the slave area or a slave module. Then click on the tab <Variables>.
Select the variable that you want to rename and click <Edit> .
Figure 58:
EC-Engineer editing
the variable names.
Now you can enter your own variable names. If the variable name is
preceded by <@>, the name will also change in MULTIPROG; without <@>,
the name is only changed in the comment.
Figure 59:
EtherCAT variable
name.
After making all alterations, save the project.
Figure 60:
Save the EtherCAT
variable names
