Mach-DSP User’s Manual
Document Number: MACH-DSP-9021
Page 50
www.ScannerMAX.com
7.4
Intermediate control parameters
The controls that are found on the Intermediate tab are separated into several
categories, including controls involved in Input command signal, position signal filtering,
damping filtering, and power amplifier drive signal filtering.
Note that there are more controls in the Intermediate section than in any other section.
Because of this, not all of the controls can be shown on the screen at the same time if
the window is not resized and made taller. To help with this, you will notice that there is
a blue rectangular area on the right (highlighted by the blue arrow). This area works like
a scroll bar. When you move the mouse over this area, you will notice that the cursor
turns into a Hand icon. If you click and drag in the blue area, you will be able to scroll
the panel and access other controls.
