SATO XL 410e, Руководство оператора, Страница: 43 / 80

Section 3: Configuration
XL400/410e Operator’s Manual Page 3-9
3.4 USER MODE (CONT’D)
Print Speed Adjustment
There are three SPEED settings on the XL410 (4 ips, 5 ips and 6 ips) and four on the
XL400e (5 ips, 6 ips, 7 ips and 8 ips). They are listed on the bottom line of the display.
The current setting is indicated by an underline cursor under one of the speed
settings. To change the setting:
1. Use the START/STOP key to step the underline cursor to the desired speed setting.
2. Once the correct setting is underlined, press the FEED key to go to the next adjustment.
Note
This command can be overridden by software command (see Print Speed, page 5-53).
See Section 4: CLEANING AND MAINTENANCE, for additional information on how to
make this adjustment for optimum print quality.
VH Offset
The Vertical and Horizontal offset allow you to move the label image both horizontally and
vertically, to position a label format correctly on a label. This allows you to use smaller label
formats on media which is larger than the original format called for without having to individually
correct each H and V field positions in the command stream. It is the same effect as using the
<ESC>A3 Base Reference Point command (See the Programming Reference).
1. Use the START/STOP key to select the vertical direction (“+” or “-”).
2. Once the correct direction is displayed, press the FEED key to accept the setting advance to
the vertical setting adjustment.
3. The underline cursor is now positioned under the least significant digit of the V offset setting.
The vertical offset will increase each time the START/STOP key is pressed. If the START/
STOP key is pressed and held down, the value will count up rapidly.
4. Once the correct vertical offset is displayed, press the FEED key to accept the setting and
advance to the horizontal setting adjustment.
5. Use the START/STOP key to select the horizontal direction (“+” or “-”).
6. Once the correct direction is displayed, press the FEED key to accept the setting advance to
the horizontal setting adjustment.
print speed
4 5 6
vh offset
v: ±000 +H: 000