GSM-4/GSM-5
SATEL
4
Module programming:
locally: module buttons or computer with the D
LOAD
10
program installed, connected to
the module RS-232 port;
remotely: computer with the D
LOAD
10
program installed, connecting by means of
GPRS.
Display providing information on the module status and facilitating programming by means
of buttons.
RS-232 port to allow:
local programming by means of computer with the D
LOAD
10
program installed;
connection to the alarm control panel or computer as an external modem;
integration
with
the INTEGRA control panel;
working in conjunction with the STAM-1 / STAM-2 monitoring station;
updating the module firmware.
Capability of remotely updating the module firmware by means of GPRS (modules
with built-in GSM u-blox LEON-G100 telephone).
Powered with 12 V DC (±15%).
3. Typical module applications
The extended functionality of GSM module enables it to be used for a variety of applications.
This section presents typical examples of its application. Some of them are capable of being
combined with one other.
3.1 Backup communication path
Fig. 1. The module working as a backup communication path.
When connected to the telephone line output (T-1 and R-1 terminals, and in the GSM-4 –
also a suitable socket), the devices are capable of making telephone calls via analog
telephone line or GSM network. You can select which communication path will be the primary
one. If the primary communication path is malfunctioning, the module can automatically
switch over to the backup one.