GSM-4/GSM-5
SATEL
26
Read – button allows reading data from the module.
Write – button allows writing data to the module.
Quit transmission – button makes it possible to cancel the data reading/writing.
Event log read – button allows reading the event log.
ON-LINE mode – button opens the window where you can bypass / unbypass zones
and activate / deactivate outputs of the module.
Configuration – button opens the "Configuration" window.
Exit – button closes the program.
6.2.4 Status bar
Fig. 15. Status bar in D
LOAD
10 program.
Explanations for Figure 15:
1 - icon indicating the status of communication with the module:
– green color – ready to send data;
– alternating green and yellow color – data transmission in progress;
– gray color – COM port disabled.
A click on the icon button in case of communication via the RS-232 port – will
enable/disable the COM port.
2 - information on way of communication with the module:
– COMn (n = COM port number) – communication through the RS-232 port;
– TCP/IP – communication using the GPRS technology.
6.2.5 Changing the program access code
1. In the "File" menu, select "Configuration", and then "Change access code" (see: Fig. 16).
Fig. 16. Functions related to the D
LOAD
10
program access.