SATEL GSM-4/GSM-5
45
e – event qualifier ( - new event; r – restore);
ff – partition number;
ggg – zone / expander / user number.
6.2.12 "TCP/IP downloading" tab
Communication over TCP/IP [Module download]
Fig. 23. "TCP/IP downloading" tab (GSM-5 module).
Server address
– address of the computer from which the module can be remotely
programmed. It can be entered as an IP address or as a name.
Server from SMS [Any address]
– if this option is enabled, the address of server, to which
the module is to connect, and the port number can be entered in the content of SMS
message initiating the connection. If the address is not entered, the module will connect to
the server whose address has been programmed in the module.
Port [Server port]
– the number of port on which the communication between computer and
module will take place.
Initiating SMS [SMS prog. module]
– the control command that must be included in the
SMS message sent to the telephone number of GSM module, so that the module can start
the procedure of establishing communication with the D
LOAD
10
program (communication
using the GPRS technology).
Dload10 key [Key]
– the string of 12 alphanumeric characters (digits, letters and special
characters) defining the key with which the data sent to the
D
LOAD
10 program will be
encrypted. The module will only establish connection to the program using the correct key.
Communication Integra-DloadX [DloadX download]
Server address
– the address of computer with the D
LOAD
X program, with which the module
(connected to the INTEGRA control panel through RS-232 port) is to communicate using
the GPRS technology. It can be entered as an IP address or as a name.
Server from SMS [Any address]
– if this option is enabled, the address of server, to which
the module is to connect, and the port number can be entered in the content of SMS
message initiating the connection. If the address is not entered, the module will connect to
the computer whose address has been programmed in the module.
Port [Server port]
– the number of port on which the communication with the D
LOAD
X
program will take place.
Initiating SMS [SMS prog.DloadX]
– the control command that must be included in the
SMS message sent to the telephone number of GSM module connected to the control
panel, so that the module can establish communication with the D
LOAD
X program using
the GPRS technology.