SATEL GSM-4/GSM-5
43
The "SIM1 block time", "SIM2 block time", "SIM1switch time" and "SIM2switch
time" parameters have effect on switching over the transmission links.
If the module fails to send an event to the selected monitoring station over all the
programmed links in turn, it will restart the reporting procedure after 2.5 minutes.
If more than one reporting link is selected for the given monitoring station and the
event has been successfully sent over a link which is not the first on the list, and
the module is to send a next event within less than 7.5 minutes, the event will be
sent over the same link. The module will make an attempt to send events,
starting from the first reporting link on the list, only after 7.5 minutes have elapsed
since sending the last event.
Telephone numbers
CDS reporting [MS1 CSD tel.nr / MS2 CSD tel.nr]
– the telephone number to which
events are reported using the CSD technology. It must be preceded by the country
code.
The CSD data transmission service is usually available in the basic package of
services offered by the mobile network operator, however before programming
suitable parameters you must make sure if it is possible to use it.
SMS reporting [MS1 SMS tel.nr / MS2 SMS tel.nr]
– the telephone number to which
events are reported using the SMS messages. It must be preceded by the country
code.
SMS format [MS1 SMS format / MS2 SMS format]
The SMS message format for SMS reporting must be entered, as required by the
monitoring station. The SMS message format programmed by default in the module
corresponds to the default settings of STAM-2 monitoring station (program version 1.2.0
or newer). If the events are to be sent in the 4/2 format, only identifier and event code
are sent (instead of the
zone symbol). Question marks will be sent instead of the
other special characters of the format.
AUDIO reporting/station simulation
Tel. Number [MS1 tel.number / MS2 tel.number]
– the number after dialing of which
by the device connected to the telephone line output the module will receive event
codes and retransmit them to the monitoring station using the GSM telephone. The
method of forwarding the event codes should be determined by selecting the suitable
reporting links – see: "Links to MS1 / Links to MS2" p. 42. If the events are to be sent
over the AUDIO link, it must be the whole number of the monitoring station to which
the events will be sent.
The programmed number must be unique and must not coincide with any other
number programmed in the module.
Reporting trouble messaging
Send SMS [SMS monit.trbl.]
– the content of SMS message which will be sent if the "Events
buffer" option is enabled and the module fails to send the event to the selected monitoring
station. The message can contain up to 32 characters.
Tel. number [Mon.trbl.tel.nr]
– the telephone number to which SMS message will be sent if
the module fails to send the event to the selected monitoring station.