Sartorius MC 210 S, Инструкция по установке и эксплуатации

Страница: 120 / 188

Diameter Determination
1
)
Diameter Determination Code 2 1 7
Symbol displayed: ◆
Key identified by: STO -
F
The diameter determination program offers an accurate solution to the problem
of determining the diameter of wires and metal filaments. To do this, you only need
to enter the density of the object to be weighed in the parameter mode and
the length of the object, using the numeric keys and
F
. The factory-set density
is the density of steel (8 g/cm
3
).
Changing the Density of the Object to Be Weighed
You must enter the density in grams per cubic centimeter (g/cm
3
).
A density may not be greater than 22.5 g/cm
3
or less than 0.1 g/cm
3
.
To select the parameter mode: – Hold down
i
for more than 2 seconds
To change the setting: – Enter a numeric value
To store the value
(in the non-volatile memory):
– Press STO -
F
Entering the Length of the Object to Be Weighed
Use the numeric keys to enter the length in millimeters of the object to be weighed,
and then store this value by pressing the
F
key identified on the display
by “STO.” Afterwards, the diameter in millimeters is calculated and displayed.
Press
w
to toggle between the diameter determination program and the standard
weighing mode.
Use in Combination with Other Programs
The diameter determination program can be used in combination with other
application programs. This means that you will have all functions of the combined
program available in addition.
Program Code
Tare memory 2 2 2
Over/under checkweighing (net weight) 2 2 3
Over/under checkweighing (difference in weight) 2 2 4
1
) = not on models MC 210 S (-0CE), MC 210 P (-0CE) and MC 410 S (-0CE)
* = including the Signatories of the Agreement on the European Economic Area
Important Note for Verified Balances Approved for Use as Legal Measuring
Instruments in the EU:*
You may not use the calculated diameter when the balance is being used
as a legal measuring instrument. The display symbol “R2” flashes to identify non-
verified display readouts (not legal for trade).
3–42