Sartorius MC 210 S, Инструкция по установке и эксплуатации

Страница: 48 / 188

Changing a Menu Code Setting
To select specific functions, you will need to set the
respective menu code.
There are three steps to changing a code:
– Accessing the menu
– Setting a code
– Confirming and storing this code
For setting menu codes, the keys have special
functions. To set a code, use the four keys which are
defined on the display as arrow points to indicate
the direction:
<
w
and >
p
= Move to the left or right
^
f
and v
F
= Increase or decrease a number
by one with each press
t
= Confirm a code setting
c
= Store a code setting and exit
the menu
Now try changing the weight unit in the second
weighing range from grams to carats “ct,”
code
3 1 4
.
Accessing the Menu (Example Code 3 1 4)
– Turn the balance off
– Turn it back on again
– While all segments are displayed, briefly press the
t
key
(10)
.
– If
-L-
is displayed, unlock the menu as follows:
– Remove the protective cap located on the
left-hand side of the balance’s/electronic computing
device’s rear panel to expose the menu
access switch
– Move the switch in the direction of the arrow
2–2