Machine Operation
SY26U Excavator OMM
4-8
Operation and Maintenance Manual — 1119
SANY
6. Add engine oil through the fill port (4) as necessary.
Always use SANY-recommended engine oil.
NOTE:
If the engine oil level is above the upper mark
on the dipstick, drain the excess engine oil.
See “Change the Engine Oil and Filter” on
Fuel Level Check
1. Turn the key switch to ON to activate the monitor. See “Starting the Engine” on page 4-15. Check the fuel level
on the monitor.
2. Turn the key switch to OFF.
Add Fuel
1. Remove the fuel filler cover. See “Fuel Tank Filler Cover” on page 4-9.
2. Fill the machine with clean diesel fuel as necessary.
NOTE:
Never overfill the fuel tank. Stop fueling if the fuel spills over the fuel fill strainer. Make sure the fuel
gun nozzle does not damage the fuel fill strainer.
3. Install the fuel fill cap after refueling.
WARNING!
•
Fuel or fuel vapors that come into contact with hot surfaces or electrical components can
cause a fire.
•
Never service the fuel system near an open flame or while smoking.
•
Clean up spilled fuel immediately.
Failure to follow these warnings could result in death or serious injury.
NOTICE!
Contaminated fuel can cause engine damage or improper machine operation. Fill the fuel tank
with clean diesel fuel.
Fig. 4-4
0003224
4
