manualshive.com logo in svg

SANY SY26U, Руководство по эксплуатации и обслуживанию


Поделиться
Скачать
background image

Introduction

SY26U Excavator OMM

1-2

Operation and Maintenance Manual — 1119

SANY

ABOUT THIS MANUAL

This manual provides operation and maintenance information for the SY26U excavator.

A copy of this manual must be stored in the machine or be accessible to the operator at all times. If the machine is 
sold, a copy of this manual must be provided to the new owner.

A copy of the operation and maintenance manual should be made available to maintenance personnel when 
servicing the machine.

It is important to read and understand this manual before beginning any operation or service. All personnel 
involved with this machine should read this manual periodically to remain knowledgeable on its operation and 
service.

Items addressed in this manual are designed to help the operator or service personnel:

•

Understand the controls and operation of the machine.

•

Point out possible hazardous situations when operating or maintaining the machine.

•

Increase machine efficiency during operation.

•

Prolong the service life of the machine.

•

Reduce maintenance costs.

Continuing improvements in the design of this machine can lead to changes which may not be covered in this 
manual. Contact a SANY dealer for the latest available information on the machine or to answer any questions 
regarding information in this manual.

WARNING!

Unsafe operation and maintenance of this machine could result in death or serious injury. 
This machine must be operated and maintained by trained and experienced personnel. Do not 
operate or work on this machine without first reading and understanding this Operation and

 

Maintenance Manual supplied with the machine.

Содержание SY26U









































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SY26U

Takeuchi TB175W Operator'S Manual preview
TB175W
Бренд: Takeuchi Страницы: 221
National Wheel-O-Vator Destiny Owner'S Manual preview
Destiny
Бренд: National Wheel-O-Vator Страницы: 8
Hyundai Robex 220LC-9A Service Manual preview
Robex 220LC-9A
Бренд: Hyundai Страницы: 41
Komatsu Utility PC26MR-3 Operation & Maintenance Manual preview
PC26MR-3
Бренд: Komatsu Utility Страницы: 252
ThyssenKrupp evolution 200 Owner'S Manual preview
evolution 200
Бренд: ThyssenKrupp Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды