SY26U Excavator OMM
Safety
SANY
Operation and Maintenance Manual — 1119
2-5
T
ABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
Mount and Dismount the Machine
Mounting or dismounting the machine presents hazards.
Observe the following:
•
Always make sure the machine is at a complete
stop before entering or exiting the machine. Never
jump on or off the machine.
•
Never exit or enter the machine by any means
other than the provided grab handles and steps.
•
Always face the machine as you mount and
dismount.
•
Always maintain three-point contact (both feet and one hand, or one foot and both hands) with the grab
handles, steps, and deck for proper support.
•
Wear shoes with slip-resistant soles.
•
Do not walk on any surface of the machine if its slip-resistant material is missing or excessively worn. Do
not step on surfaces of the machine that are not approved for walking or working. Keep all walking and
working surfaces of the machine clean, dry, and slip-resistant.
•
Always keep grab handles, steps, and walkway areas clean and clear of mud, oil, grease, or similar debris.
If these areas are damaged, have them repaired or replaced immediately.
MACHINE SAFETY
Authorized Use of This Machine
This multipurpose construction machine is used primarily for digging or loading earth and stones. It can also be
used for grading, slope-trimming, lifting, breaking, demolishing, and trenching. It can perform the functions of
bulldozer, loader, and crane. SANY assumes no responsibility for any consequence caused by use outside this
specified range.
UNAUTHORIZED USE OF THIS MACHINE
Unauthorized uses include, but are not limited to, the following:
•
Transporting people on the machine or in the canopy.
•
Overloading the machine beyond its capacity.
Unauthorized Machine Modifications
Do not perform any unauthorized machine modifications.
Fig. 2-1
0003054
