SY26U Excavator OMM
Safety
SANY
Operation and Maintenance Manual — 1119
2-9
T
ABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
Cleaning the Machine
Always use hot water and mild, nonflammable, grease-cutting soaps or cleaning agents to clean the machine.
Never use flammable or caustic cleaning agents.
Never use high-pressure steam cleaners to clean the machine.
Always lubricate the machine thoroughly after cleaning it to remove any water or soap residue.
Keep the canopy, mirrors, and lights clean.
Fluid Systems
Adding Fluids to the Machine
When adding fluids to the machine, be aware that fluid systems may be under pressure and hot.
Refueling
When adding fuel, shut down the machine before removing the fuel tank cap.
Fuel spills present a hazard if not cleaned up immediately.
Refuel only in a well-ventilated area. Never smoke or allow open flames nearby while refueling the machine.
Never mix gasoline with diesel fuel. Gasoline is extremely flammable and could cause an explosion.
Always allow room for the fuel to expand when filling the fuel tank.
High-Pressure Fluid Lines
Check for cracks in the lines or hoses, and for swelling in the hoses.
NOTE:
If there is any leakage from a line or hose, the surrounding area may be wet.
Replace lines and hoses immediately if swelling, cracking, or leaks are found, or if a failure occurs.
WARNING!
•
Never perform repairs to items while any system is under pressure.
•
Never use your hands to check or feel for leaks. Always wear safety glasses and leather
gloves, and use a piece of wood or cardboard to check for leaks.
•
If high-pressure fluids penetrate skin or get into eyes, seek medical attention immediately.
Failure to follow these warning can result in death or serious injury.
