Santerno ASA 4.0 Advanced, Руководство пользователя

Страница: 57 / 78

6O – Frequency
Options: Soft Trip and Log (default) Trip and Reset
Soft Trip and Reset Warn and Log
Trip Starter Log Only
Description: Selects the soft starter's response to the protection event.
6P – Phase Sequence
Options: Soft Trip and Log (default) Trip and Reset
Soft Trip and Reset Warn and Log
Trip Starter Log Only
Description: Selects the soft starter's response to the protection event.
6Q – Motor Overtemperature
Options: Soft Trip and Log (default) Trip and Reset
Soft Trip and Reset Warn and Log
Trip Starter Log Only
Description: Selects the soft starter's response to the protection event.
6R – Motor Thermistor Circuit
Options: Soft Trip and Log (default) Trip and Reset
Soft Trip and Reset Warn and Log
Trip Starter Log Only
Description: Selects the soft starter's response to the protection event.
6S – Shorted SCR Action
Options: 3-Phase Control Only (default)
PowerThrough
Description: Selects whether the soft starter will allow PowerThrough operation, if the soft starter is damaged on one phase.
The soft starter will use two-phase control, allowing the motor to continue operating in critical applications. Refer to
PowerThrough on page 33 for further information.
6T – Battery/Clock
Options: Soft Trip and Log (default) Trip and Reset
Soft Trip and Reset Warn and Log
Trip Starter Log Only
Description: Selects the soft starter's response to the protection event.
9.11 7 Inputs
7A – Input A Function
Options: Command Override: Network Overrides the setting of 1A and sets the command source to the
communications network.
Command Override: Digital Overrides the setting of 1A and sets the command source to the digital inputs.
Command Override: Keypad Overrides the setting of 1A and sets the command source to the remote keypad.
Input Trip (N/O) (default) A closed circuit across 13, 14 trips the soft starter.
Input Trip (N/C) An open circuit across 13, 14 trips the soft starter.
Emergency Mode A closed circuit across 13, 14 activates emergency mode. When the ASA 4.0
Advanced receives a start command, it will continue to run until a stop command
is received, ignoring all trips and warnings.
Jog Forward Activates jog operation in a forward direction.
Jog Reverse Activates jog operation in reverse direction.
Zero Speed Sensor An open circuit across 13, 14 indicates to the soft starter that the motor has
reached a standstill. The soft starter requires a normally open zero speed
sensor.
Motor Set Select A closed circuit across 13, 14 instructs the starter to use the secondary motor
configuration for the next start/stop cycle.
Reverse Direction A closed circuit across 13, 14 instructs the starter to reverse the phase
sequence for the next start.
Pump Clean Activates the pump clean function.
Description: Selects the function of Input A.
ASA 4.0 Advanced 57/78