NOTE
The network address can also be set using parameters 12H~12S.
NOTE
To configure the ASA 4.0 Advanced for use with other communication protocols, use parameters 12A~12G.
5.9
Digital I/O State
The top line of the screen shows the start/stop, reset and programmable inputs.
The bottom line of the screen shows the fixed Main Contactor output, then programmable
outputs A and B.
Digital I/O State
Inputs: 00000000
Outputs: 00000000
33 34 41 42 44 53 54
10 11 12 13 14 15 21 22
7
6
5
4
3
2
1
1
10, 11: Reset input
5
33, 34: Main contactor output
2
11, 12: Start/stop input
6
41, 42, 44: Relay output A
3
13, 14: Programmable input A
7
53, 54: Relay output B
4
13, 15: Programmable input B
5.10
Analog I/O State
The top line of the screen shows the state of the motor thermistor input.
The bottom line of the screen shows the value of the analog output.
Analog I/O State
Thermistor: 0
4-20mA Output: 04.0 mA
Thermistor input:
S = Short
H = Hot
C = Cold
O = Open
5.11
Serial Number & Rating
The top line of the screen shows the product name.
The middle line shows the unit's serial number.
The bottom line of the screen shows the model number.
Serial Number & Rating
ASA 4.0 Advanced
123456-123
0410-5-S1-12
5.12
Software Versions
The software versions screen reports the version of each software component in the starter:
•
user interface
•
motor control
•
remote keypad (if connected)
•
parameter list
•
bootloader
•
expansion card (if fitted)
NOTE
Updated software, including alternative languages, can be loaded into the starter via the USB port if required. Contact your
local supplier for further information.
5.13
Thermistor Reset
The thermistor input is disabled by default, but activates automatically when a thermistor is detected. If thermistors have previously been
connected to the ASA 4.0 Advanced but are no longer required, use the Thermistor Reset function to disable the thermistor.
ASA 4.0 Advanced
27/78
Содержание ASA 4.0 Advanced
Страница 78: ...78 78 ASA 4 0 Advanced ...
