User manual SNC-637ID
_________________________________________________________________________________
- 54 -
6. Motion Setup
Sets the general functions of Pan/Tilt motions.
Motion
Lock
[ON/OFF]
If Motion Lock is set to ON, it is impossibletoset
up and delete Preset, Swing, Pattern and
Group. It is possible only to run those
functions.To
set
up
and
delete
those
functions,enter into OSD menu.
Power Up
Action
[ON/OFF]
Refer to “Other Functions" section.
Auto Flip
[ON/OFF]
Refer to “Other Functions" section.
Jog Max
Speed
[1 /sec ~360 /sec]
Sets the maximum jog speed. Jog speed is
Inversely proportional to the zoom
magnifications. As the zoom magnification goes
up, the pan/tilt speed goes down.
Jog
Direction
[INVERSE/NORMAL]
Sets the Jog Direction. If this is set to „Inverse‟,
the view direction in the screen is same as the
direction of joystick. If this is set to „Normal‟, the
view direction in the screen is
the reverse dirction of joystick.
Freeze
in Preset
[ON/OFF]
Sets Frame Freeze Function. This feature
freezes the scene on the monitor when going to
a preset. At the start point of a preset
movement, a camera starts freezing the image
of the start point. Camera keeps displaying the
image of the start point during preset movement
and does not display the images which camera
gets during preset movement. As soon as
camera stops at preset end point, camera starts
displaying live images which it gets at the end
preset point. This feature also reduces
bandwidth when working with digital systems or
digital network systems.
This function availability should be different by
models.
4
MOTION SETUP
------------------------
MOTION LOCK OFF
PWR UP ACTION ON
AUTO FLIP ON
JOG MAX SPEED 120/SEC
JOG DIRECTION INVERSE
FRZ IN PRESET OFF
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
