User manual SNC-637ID
_________________________________________________________________________________
- 16 -
10) In case of installation without IP sharing device under Static IP, tick
off Enable
DHCP .
11)
Click „Submit‟ Button of [3-3] to save setting value.
12)
Click „OK‟ upon appearing of IP Change Window of [3-4].
Pic 3 4 IP Change
13) Remove LAN Cable (Cross Cable) connected between SNC-637ID and PC.
14) Connect SNC-637ID to Network with LAN Cable (Straight Cable).
15) Connect PC to Network with LAN Cable (Straight Cable)..
16) Set up IP Address, Subnet Mask and Gate way of PC according to Network
environment.
17) Check
Run WebBrowser on PC, input IP address set in SNC-637ID onto URLand
click Enter ,
Check if IP Setting is correct or not, referring to Video Check
In case Video is seen, SNC-637ID has been correctly set up.
In case Video is not seen, check whether there may be confliction ofIP in
Network, and re-check the set value of Network environment of SNC-637ID,
and Network environment of User s PC.
