User manual SNC-637ID
_________________________________________________________________________________
- 44 -
5.4.1
OSD Menu Setting
1. OSD Display
P/T/Z Information
Camera ID
Alarm Information
Action Title
Preset Label
LABEL12345 PRESET1
I:-2- O:1
CAM 1 15/4/x1/N
P/T/Z Information
Displays the amount of pan from zero degree vertical, the amount of tilt
from zero degree horizontal and current compass direction.
Also identifies the amount of the zoom magnification.
Camera ID
Displays the selected Camera ID (Address).
Action Title
Identfies Actions
"SET PRESET xxx"
When Preset xxx is memorized.
"PRESET xxx"
When the camera reaches Preset xxx.
"PATTERN x"
When Pattern x is in action.
"SWG /PRESET xxx"
When Swing x is in action. Displays both of
Swing number and Preset number.
"UNDEFINED"
When a undefined function is called to run
Preset Label
Displays preset labels when the camera arrives at presets.
Alarm Information
Displays activated alarms. This information shows current state of
Alarm Inputs and Relay Outputs. If an Input point is
ON
state, it will
show a number corresponding to each point. If an Input point is
OFF
state,
'-'
will be displayed.
Example) The point 2 & 3 of inputs are
ON
and Output is
ON
,
OSD will
show as below.
I:-23 O:1
