User manual SNC-637ID
_________________________________________________________________________________
- 7 -
1.2.2 Connector Description
DC 12V Power Input :
The SNC-637ID Camera has a port that can output DC12V
for the analog camera module.
Digital Output
Digital Input
Video Output :
The SNC-637ID Camera supports one analog video out of
composite signal with BNC connector.
Ethernet Port :
Standard RJ45 connector. Supporting NWAY.
Reset Button
Step 1 :
Switch off SNC-637ID Camera by disconnecting the power cable.
Step 2 :
Using a suitable pointed object, press and continue to hold the Reset
Button depressed. While continuing to hold the reset button depressed, reconnect
the power cable.
Step 3 :
Keep holding the reset button depressed around 6 seconds, release the
reset button. The unit will start up with factory default settings.
DIP Switch (Baud rage & Address setting)
:
Please refer to the 2.4.3 for more descriptions
Sensor I/O Port
(No Network support)
