User manual SNC-637ID
_________________________________________________________________________________
- 57 -
7. Preset Setup
Preset
Number
[1~128]
Selects a preset number to set up. If a
selected preset is already defined, the
camera moves to the pre-defined position
and preset parameters such as Label and
CAM Adjust show on the monitor. If a selected
preset is not defined, “UNDEFINED”
shows on the monitor.
Clear
Preset
[CANCEL/OK]
Deletes the data of the selected Preset.
Edit
Preset Scene
Re-defines the scene position of the selected
Preset.
Edit
Preset Label
Edits the label of the selected Preset to
show on the monitor when the preset
runs.MAX. 10 alphanuberic characteristics are
allowed.
Relay Out
Defines the relay output.
CAM Adjust
[GLOBAL/LOCAL]
WB(White
Balance)
and
AE(Auto
Exposure)can be set up independently for
each
preset. There are 2 modes, "Global" mode &
"Local" mode. The Global mode is that WB
and/or AE are/is set up totally and
simultaneously for all presets. The Global
parameter setup such as WB and AE can be
done in "ZOOM CAMERA SETUP" menu. The
Local mode is that WB and/or AE
are/is set up independently or separately for
each preset. The Local parameter setup
for WB and AE can be done in each preset
setup menu. Each Local parameter such as
WB and AE activates correspondingly when
the camera arrives at each preset
position. During jog operation, Global WB/AE
value should be applied. All Local WB/AE
values do not change although Global
WB/AE value changes. The Local mode
has the prior to the Global mode.
PRESET SETUP
------------------------
PRESET NO. 1
CLR PRESET CANCEL
<EDIT SCENE>
<EDIT LABEL> LABEL123
RELAY OUT OFF
CAM ADJUST GLOBAL
BACK
EXIT
