User manual SNC-637ID
_________________________________________________________________________________
- 18 -
Pic. 3 6 IP Change
9)
It is connected to IP newly set up, in 20 seconds after window.
10)
Check Video of SNC-637ID referring to 2. Install and Video Check as soon as it is
connected to IP newly set up.
11)
Remove LAN Cable (Cross Cable) connected between SNC-637ID and PC.
12)
Connect SNC-637ID to Network with LAN Cable (Straight Cable).
13)
Connect PC to Network with LAN Cable (Straight Cable).
14)
Port-Forward the port designated to use SNC-637ID, in IP Sharing Device.
Refer
to manual of IP Sharing Device for details.
15)
Check 1
(local check)
Run Web Browser and input IP address of SNC-637ID in URL and click
„Enter‟. If
you changed HTTP Port, you must input http://IP Address:
Port Number
. For
example, If you set IP address of SNC-637ID to 192.168.10.88 and changed Web
Server port to 81, you must input http://192.168.10.88:81.
16)
Check 2
(Check from outside)
After registration of SNC-637ID in Service Server (refer to Use of Service Server of
5. Basic Use , connect to SNC-637ID by Domain Name (Server Name) allocated to
SNC-637ID.
For example, run Web Browser and input Domain Name allocated to SNC-637ID in
URL. In http://IPDD6155SD.speco4u.net , IPDD6155SD is to be Name of Server
registered in Service Server by user.
If the initial page is shown, check Video of SNC-637ID referring to
2. Install and
Video Check
. If Video is seen, set up is properly done.
