User manual SNC-637ID
_________________________________________________________________________________
- 60 -
9. Pattern Setup
Pattern Edit
Pattern Number
[1~4 ]
Selects a Pattern number to edit.
If the selected pattern number is not
defined, "UNDEFINED" will be displayed
under the selected pattern number.
Clear Pattern
[CANCEL/OK]
Deletes the data of the selected pattern.
Run Pattern
Runs the Pattern for the test purposes to
check if it works properly.
Edit Pattern
Edits the selected pattern.
①
With the Joystick of your controller, move the camera tothe
start position with an appropriate zoom magnafication.To
start the pattern recording, press
NEAR
key. To exit,press
FAR
key.
②
Move camera with joystick of controller or run preset function
to memorize the path (mostly curve path) in the selected
pattern. The movement by Joystick and preset movement
will be memorized in a pattern. After a pattern is
programmed, the remaining storage is displayed in progress
bar on the screen.
③
To save the data and exit, press
NEA
R key. To cancel
saving the data and delete the data, press
FAR
key.
PATTERN SETUP
------------------------
PATTERN NO. 1
UNDEFINED
CLR PATTERN CANCEL
RUN PATTERN
<EDIT PATTERN>
BACK
EXIT
EDIT PATTERN 1
------------------------
MOVE TO START POSITION
[NEAR:START /FAR:CANCEL]
EDIT PATTERN 1
[NEAR:SAVE /FAR:DELETE]
0/0/x1/N
