User manual SNC-637ID
_________________________________________________________________________________
- 13 -
3. Basic Setting
3.1 Check Network and Installation Type
This Chapter is for basic setting of SNC-637ID. To install Hardware of SNC-637ID Network
Camera, basic understanding of Network is required.
Please refer to Chapter 6 in case
knowledge of Network Environment is required..
There is 2 ways to install Hardware, The
one is
to install SNC-637ID without IP sharing Device
under Cable Modem or Leased
Line, the other one is
to install SNC-637ID under IP sharing Device
, which is required
necessarily under PPPoE environment, and even under Leased Line or Cable Modem. The
default IP Address of SNC-637ID is preset to 192.168.1.168 and Subnet Mask to
255.255.255.0 and Gateway to 192.168.1.1 in ex-factory. This explanation is based upon
default value of ex-factory.
Caution 1 : Check Video before installation, on
2. Install and Video Check
.
Caution 2 : In case using IP sharing Device, only Global IP is available.
Caution 3 : SNC-637ID does not support PPPoE. IP Sharing Device is required to
connect to SNC-637ID under PPPoE.