User manual SNC-637ID
_________________________________________________________________________________
- 17 -
3.3 Installation with IP Sharing Device (Router)
1)
After checking Video in
2. Installand Video Check ,
then go to the next step.
2)
Connect SNC-637ID and PC with LAN Cable (Cross Cable).
3)
Cable Connection and Network Setting should be done same as per 2.
Install and Video Check .
4)
Go to Network Setting Page of Administrator
‟s Page as per 4), 5), 6) of „Static IP
Setup
‟.
5)
In WAN Setting of [3-3], input IP Address, Subnet Mask, Gateway, HTTP Port
according to Network environment to connected SNC-637ID to.
6)
For setting of DNS Server , input DNS Address to fit with Network Environment to
set. Use DNS value normally set in PC.
7)
In case of installation without IP sharing device under Static IP, tick off Enable
DHCP . Click Submit Button of [3-6] to save the set value.
Pic. 3 5 Network Setting
8)
Click OK upon appearing of IP Change Window of [3-10].
