User manual SNC-637ID
_________________________________________________________________________________
- 51 -
Auto Exposure Setup
Backlight
[OFF/WDR/BLC/HLC] or [OFF/BLC/HLC]
or [ON/OFF]
Sets Backlight Compensation. If a bright
backlight is present, the subjects in the
picture may appear dark or as a silhouette.
Backlight compensation enhances objects in
the center of the picture. The camera uses the
center of the picture to adjust the iris. If there
is a bright light source outside of this area, it
will wash out to white. The camera will adjust
the iris so that the object in the sensitive area
is properly exposed.
Some modles has WDR(Wide Dynamic Range)
function, which are better function than BLC.
HLC(High Light Compensation) function
removes the high light in a limited
environment such as parking garage.
Day/Night
[AUTO/DAY/NIGHT] or
[AUTO1/AUTO2/DAY/NIGHT]
Sets Day&Night mode.
There are 2 AUTO modes in 10 model
# AUTO1 Mode : The sensitivity to change a
mode is fixed.
# AUTO2 Mode : The sensitivity to change
Night mode to Day mode is adjustable.
The sensitivity range is 1~255. The higher
numeric value is selected, the lower
illumination Night mode changes to Day
mode at. If this is set to AUTO2 mode, ACGis
fixed to HIGH.
Brightness
[0~100]
Adjusts the brightness of the images. Iris, The
Shutter Speed and Gain are adjusted
automatically in correspondence with each
numeric value.
AE SETUP - GLOBAL
------------------------
BACKLIGHT OFF
DAY/NIGHT AUTO
BRIGHTNESS 50
IRIS AUTO
SHUTTER ESC
AGC MIDDLE
SSNR MIDDLE
SENS-UP <AUTO>
BACK
EXIT