User manual SNC-637ID
_________________________________________________________________________________
- 49 -
6.
Camera Setup
Sets the general functions of zoom camera module.
Focus Mode
[AUTO/MANUAL/SEMIAUTO]
Sets camera Focus mode.
SEMIAUTO Mode
This mode automatically exchanges focus
modes between Manual Focus mode and
Auto Focus mode by operation. Manual
Focus mode activates in preset operation
and Auto Focus mode activates during
jog operation. With Manual mode at
presets, Focus data is memorized in
eachpreset in advance and the camera calls
focus
data
in
correspondence
with
presetsas soon as camera arrives at
presets. It should shorten time to get
focuses
.
Focusmode automatically changes
to Auto Focusmode when jog operation
starts.
Digital Zoom
[ON/OFF]
Sets the digital zoom functions to ON/OFF.If
this is set to OFF, the optical zoom
function runs but the zoom function stops t
the end of optical zoom magnification.
Image Flip
[ON/OFF]
Sets System Image Flip Function to
ON/OFF. When this function is set to ON,
flipped images always come out. When
the camera is installed as Desktop type, set
to ON to get proper images.
Sharpness
[0-32] or [0~31]
Sets image sharpness to enhance pictures
ZOOM CAMERA SETUP
------------------------
FOCUS MODE SEMIAUTO
DIGITAL ZOOM ON
IMAGE FLIP OFF
SHARPNESS 16
STABILIZATION OFF
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
BACK
EXIT
