Santec SNC-637ID, Руководство пользователя

Страница: 56 / 67

User manual SNC-637ID
_________________________________________________________________________________
- 56 -

Alarm Input Setup
Defines Alarm Function. When an alarm is receive, an input
signal to the camera triggers the user-defined action programmed
for the alarm.

Alarm No [1~3]
Selects a sensor number to set up.

Type [Normal OPEN/Normal CLOSE]
Selects sensor operation type.

Action [NOT
USED/PRESET/PATTERN/SWING/GROUP]
Selects an action to run when a sensor signal is
input.

Hold Time [ENDLESS / 1~59 SEC. / 1~180 MIN.]
Sets the time period for the action which is run
by external sensor activation. After the
time period passes, the action pre-defined in
“Post Action” runs sequentially in succession to
the action by external sensor activation. If this
option is set to “ENDLESS”, “Post
Action” does not activate.

Post Action [HOME/PRESET/PATTERN/SWING/GROUP/P
REV ACTION]
Selects the action that a camera will run after
the time period in“HOLD TIME” passes. If Post
Action is set to “PREV. ACTION”, the camera
runs the previous action which it ran most
recently.
ALARM INPUT SETUP
------------------------
ALARM NO. 1
TYPE N.OPEN
ACTION NOT USED
HOLD TIME ENDLESS
POST ACTION HOME
BACK
EXIT