ENGLISH
135
135
You can use your Miniket Photo as a USB mass storage device.
1. Connect the Miniket Photo to the PC with the
provided USB cable as shown in the figure.
2. Turn on your PC.
3. Set the Mode Dial to
Storage
.
4. Press the [POWER] button to turn on the device.
5. Locate the <Miniket> or <Removable Storage
Device> recognised by the PC and then double-
click it.
6. Copy files into the <MISC> folder under the <Miniket> or <Removable Storage Device>.
7. When finished, disconnect the cable.
[ Warning ]
✤
You cannot create a new folder on your Miniket Photo set.
✤
If you create a new folder on your memory card using a PC, it will not play back music files stored on it.
[ Notes ]
✤
You cannot create a new folder on your Miniket Photo set.
✤
Multiple USB devices connected to a PC or using USB hubs may cause communication / installation errors with the Miniket Photo.
✤
If the PC does not recognise the USB device when the USB cable is connected to the front USB port, try the USB port on the rear panel of
the PC.
Miscellaneous Information : Connecting To Other Devices
Using as a Mass Storage Device
00934C SC-MS10 USA~152 9/30/05 11:00 AM Page 135