12 English
O
v
en use
Oven use
Setting the time
When power is supplied, “88:88” and then “12:00” is automatically displayed on
the display.
Please set the current time. The time can be displayed in either the 24-hour or
12-hour notation. You must set the clock:
•
When you first install your microwave oven
•
After a power failure
NOTE
Do not forget to reset the clock when you switch to and from summer and winter
time.
3
1
2
1.
Press the
Clock
button.
2.
Press the
Up/Down
button to set time
display type. (12H or 24H)
3.
Press the
Select
button to complete the
setup.
5
7
6
4
4.
Press the
Up/Down
button to set the
hour.
5.
Press the
Select
button.
6.
Press the
Up/Down
button to set the
minute.
7.
When the right time is displayed, press
the
Select
button to start the clock.
Result:
The time is displayed
whenever you are not using
the microwave oven.
Checking that your oven is operating correctly
The following simple procedure enables you to check that your oven is working
correctly at all times.
Open the oven door, and place a glass of water on the turntable. Then, close the
door.
1
1.
Press the
+30s
button and set the time
to 4-5 minutes by pressing the
+30s
button the appropriate number of
times.
2
2.
Press the
START
button.
Result:
The oven heats the water for
4 to 5 minutes. The water
should then be boiling.
NOTE
The oven must be plugged into an appropriate wall socket. The turntable must be
in position in the oven. If a power level other than the maximum is used, the water
takes longer to boil.
MG23J5133AM_EO_DE68-04328J-04_EN.indd 12
MG23J5133AM_EO_DE68-04328J-04_EN.indd 12
23/7/2022 1:18:30 PM
23/7/2022 1:18:30 PM