Samsung CLX-419x series, Руководство пользователя

Страница: 231 / 423

Wireless network setup
231
2. Using a Network-Connected Machine
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable connection
status.
1 Check whether or not the network cable is connected to the machine. If
not, connect the machine with a standard network cable.
2
Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine’s new IP address in the browser window.
For example,
3
Click Login on the upper right of the SyncThru™ Web Service website.
4
Type in the ID and Password then click Login . We recommend you to
change the default password for security reasons.
• ID: admin
• Password: sec00000
5 When the SyncThru™ Web Service window opens, click Network
Settings .
6 Click Wireless > Wizard .
Wizard will help you setup the wireless network configuration. However, if
you want to set the wireless network directly, select Custom .
7
Select the one Network Name(SSID) in the list.
• SSID : SSID (Service Set Identifier) is a name that identifies a wireless
network, access points, and wireless devices attempting to connect
to a specific wireless network must use the same SSID. The SSID is
case sensitive.
• Operation Mode : Operation Mode refers to the type of wireless
connections (see "Wireless network name and network password"
on page 195).
- Ad-hoc : Allows wireless devices to communicate directly with
each other in a peer-to-peer environment.
- Infrastructure : Allows wireless devices to communicate with
each other through an access point.
If your network’s Operation Mode is Infrastructure , select the SSID of the
access point. If the Operation Mode is Ad-hoc , select the machine’s SSID.
8 Click Next .
If the wireless security setting window appears, enter the registered
password (network password) and click
Next .