Sam Sirius 830, Инструкция по установке и быстрому запуску

Страница: 53 / 72

Sirius 830 Installation Manual www.s-a-m.com Workbench
Issue 2 Rev 2 Page 53 © 2016 SAM
11. Workbench
The Workbench software uses a database to store router and system configuration details.
The Workbench database is written (pushed) to the router controllers to configure them. Once
the router controllers have been configured in this way they store the database locally
allowing the router to work independently after a power off even if the connection to the
Workbench database PC/server is not available.
The database can be created from scratch, custom built by SAM (chargeable) or based on
one of the supplied sample/default databases. See the Workbench User manual for full
details of Workbench operation and usage.
The following sections describe basic Workbench installation, connecting Workbench to the
router and basic configuration including connecting Workbench to a database.
The router is supplied with Workbench, LiveRunner and a sample database installed on the
Door PC. The installed sample database is either video only or AHP depending on the
input/output modules fitted.
If one or more LiveRunner clients are to be installed on computers, other than the Door PC,
the database shipped on the Door PC must be moved to a separate Workbench server or
client/server, see section 11.2.3 for details. This does not apply to Workbench clients used for
configuration or to RollCall clients connected to the controller(s).
Although Workbench configuration can be carried out using the Door PC (if a USB mouse and
keyboard are connected) this is not recommend as the screen resolution on the door screen
is relatively low. A Workbench installation DVD is supplied with the router and this can be
used to install a Workbench client on a separate computer which can then be used to
configure the router.
11.1 Installing Workbench
Once the router and the computer(s) are connected to a network Workbench can be installed
on the computer(s).
The router is shipped with a Workbench DVD that contains a copy of the Workbench
software. Full installation details, minimum computer specifications and troubleshooting can
be found in the Workbench user manual. Workbench should be installed on a computer that
has access to the router via a network.
1. Insert the Workbench DVD into a suitable computer that is connected to the router via
a network.
2. The installation starts automatically. If it doesn’t start browse to the installation DVD
and double click on
Workbenchinstaller.exe .
Note:
During the installation, do not close the installation wizard or the Workbench Install Helper.
Wait until the entire setup process is complete before exiting the install wizard and
Workbench Install Helper.