Sam Sirius 830, Инструкция по установке и быстрому запуску

Страница: 46 / 72

Sirius 830 Installation Manual www.s-a-m.com Testing the Sirius 830
Issue 2 Rev 2 Page 46 © 2016 SAM
10.2 Setting a Route Using the Router Door PC
This example uses Video input 1 routed to Video output 2. If you have different input and
output numbers simply substitute the correct numbers when working through the example.
1. Live Runner should run automatically and display a screen similar to Fig 29.
• If a different Live Runner screen is displayed touch the Menu button in the bottom
left corner of the screen to display the main menu screen.
• If Live Runner is not running double tap the shortcut on the Microsoft Windows
screen to start it up.
2. Open the Catsii Control screen on the Door PC (see Fig 30.) by touching the Catsii
button on the Main Menu screen.
3. Ensure the Catsii LEDs are enabled by touching the Global Catsii On button. Set the
Catsii LEDs to signal status mode by touching both of the Normal buttons.
4. Return to the main menu screen by touching the Menu button in the bottom left of the
screen.
5. Connect a valid signal source to input 1 on the rear of the router.
6. Check the Catsii LED on input 1 on the rear of the router changes from red to another
color depending on signal standard (see section 10.3).
Fig 29. Live Runner Main Menu Screen
Fig 30. Catsii Control Screen