Sam Sirius 830, Инструкция по установке и быстрому запуску

Страница: 42 / 72

Sirius 830 Installation Manual www.s-a-m.com Powering the Sirius 830
Issue 2 Rev 2 Page 42 © 2016 SAM
9.1.2.1 Configuration Errors
The router controller generates an error if one or more of the configured modules in the router
fails to power up. Errors are displayed on the Door screen and the router controller LEDs (see
Table 3. for LED color and Fig 25. for LED location).
If the Door screen and router controller indicate that the configuration is not as expected (i.e.
modules added or missing) then this can be resolved using Workbench. For details of how to
add modules to the router see the Sirius 800 Maintenance & Upgrade manual.
9.1.3 Starting the Door PC Manually
The Door PC starts automatically when the Sirius 830 is powered up. If the Door PC has been
shut down and needs starting manually the following procedure should be used.
1. With the Sirius 830 running open the frame door.
2. Inside the back of the door is the power switch for the Door PC (see Fig 26.).
3. Switch the Door PC on by pressing and releasing the Door PC power switch (it will not
latch in place). Wait until the computer is fully booted up before proceeding further.
Router Controller LED LED Color
Nucleus2 2463 4 Pulsing Orange
Table 3. Controller Mismatch Notification
Fig 26. Door PC
Door PC Power Switch LED Power Indicator