Sam Sirius 830, Инструкция по установке и быстрому запуску

Страница: 27 / 72

Sirius 830 Installation Manual www.s-a-m.com Rear Connectors
Issue 2 Rev 2 Page 27 © 2016 SAM
Door Ethernet RJ45 Ethernet - Used to connect the door PC to an external
network
RS485 1 (COM 3)
to 4 (COM 6) 9 Pin D-Type socket x 4 - Serial Control, these correspond to
ports; COM 3 to COM 6 in Workbench
Video Ref BNC x 8 - Video reference (4 pairs, each with passive loop
through) B+B, and Tri-level
Note : No internal termination.
Ethernet A, B RJ45 x 2 - Ethernet for controller A and B.
If two Nucleus controllers are fitted both the Ethernet A and
Ethernet B ports must be connected to the network.
BAL + LTC 9 Pin D-Type socket - AES reference 110

balanced termination
and LTC input termination
Unbal BNC - AES reference, 75

termination
Note : Physically only one AES reference (balanced or unbalanced) should be connected.
Connecting both will stop the audio router module(s) functioning correctly.
Connector Function
Table 2. Sirius 830 Control Rear Panel