Sam Sirius 830, Инструкция по установке и быстрому запуску

Страница: 49 / 72

Sirius 830 Installation Manual www.s-a-m.com Testing the Sirius 830
Issue 2 Rev 2 Page 49 © 2016 SAM
10.3.2 MADI Audio Catsii Colors
10.4 External Control Input and Output Port Mapping
The Sirius 830 routers are supplied with Workbench, LiveRunner and a sample/default
database installed on the Door PC. The installed sample database is either video only or AHP
depending on the input/output modules fitted.
Table 7. shows the Sirius 830 crosspoint address mapping:
Signal Condition - MADI Input (4915) & Output (4929/4925) Default color
[1]
[1]
You can change these defaults through Workbench.
No valid MADI signal Red
56 Channel MADI @ 48 kHz Yellow - pulsed Off
56 Channel MADI @ 44.1 kHz Yellow - pulsed Blue
56 Channel MADI @ other sample rates Yellow - pulsed Red
Valid 56 Channel MADI Redundant signal (input only) Yellow
64 Channel MADI @ 48 kHz Green - pulsed Off
64 Channel MADI @ 44.1 kHz Green - pulsed Blue
64 Channel MADI @ other sample rates Green - pulsed Red
Valid 64 Channel MADI Redundant signal (input only) Green
Table 6. Default Audio Catsii Configurations
Note:
• The information in this section is only correct when the Sirius 830 router control
module(s) are loaded with the sample/default database. Databases can be
modified including the mapping information.
• If the router is shipped with a custom database the mapping may vary but can be
checked and edited using the Workbench software, see the Workbench User
Manual for details.
Input/Output Range Addresses
Video Inputs 1 to 288 Source 0 to 287
Main Video Outputs 1 to 288 Destination 0 to 287
Multiviewer Outputs 1 to 140 Destination 1152 to 1291
Monitoring Outputs 1 to 4 Destination 16370 to 16373
Video Destinations 289 to 1152 are not used and do not respond to any control
Audio Inputs
(Nucleus2 only)
1 to 9216 Source 0 to 9215
Audio Outputs
(Nucleus2 only)
1 to 9216 Destination 0 to 9215
Table 7. Sirius 830 Input and Output Port Mapping