Saluki S3602 Series Скачать руководство пользователя

Страница: 14 / 69

Tel: 886. 909 602 109 Email: [email protected]

www.salukitec.com

Manual Navigation

This chapter introduces the functions, chapter composition and main contents of the quick start guide of the

S3602 series vector network analyzer, and the instrument-related documents for the user.

1.1

About Manual

The manual introduces the basic functions and operations of the S3602 series vector network analyzer produced

by Saluki Technology Inc. It describes the guidance of operation before start-up, system Setup, characteristics of the

front and rear panel, basic operation method, simple fault diagnosis and repair, etc., to help you rapidly get

familiar with and understand key points of the instrument operation method and use. For the convenience of

operation, please carefully read the manual before operating the instrument, and properly operating it according to the

guidance in the manual.
Due to the limit of time and knowledge of the writer, there may be some omissions or errors. Please kindly contact us to

correct such errors. We are sorry for the flaws which may cause your any inconvenience.
The quick start guide includes the following chapters.

●

Preparation for use

This chapter introduces the inspection before operation, operating system configuration, initial configuration,

appearance, etc. of S3602 series vector network analyzer to help the user make preparation for proper and safe

operation.

●

Instrument Appearance

This chapter introduces the elements and functions of the front panel, rear panel and operation interface of S3602 series

vector network analyzer.

●

Instrument Power-on/off

This chapter introduces S3602 turn on/off operations and system recovery.

●

Human Machine Interface

This chapter introduces the HMI of S3602 and display setups.

●

Typical application

This chapter describes some basic operations in detail , such as RF continuous wave Setup, modulation, sweep, data

storage/call, etc. This will help user to get familiar with the operations rapidly.

●

Help

This chapter Includes the basic fault diagnosis, troubleshooting and repair methods.

1.2

Related Documents

The documents related to S3602 series vector network analyzer include:

●

User Manual

●

Program control document

●

Online help

User Manual

This manual introduces the functions and operations of the instrument in details, including configuration, measurement,

program control, maintenance, etc. It aims to guide the user to comprehensively understand the functional

characteristics and common test methods of the instrument. It mainly includes the following chapters:

●

Manual Navigation

Содержание S3602 Series






































































Результаты поиска

Содержание S3602 Series

Отзывы:

Похожие инструкции для S3602 Series

Бренды по названию

Популярные бренды

Saluki S3602 Series, Быстрый старт

Результаты поиска

Содержание S3602 Series

Отзывы:

Похожие инструкции для S3602 Series

Бренды по названию

Популярные бренды