Saluki S3602 Series, Быстрый старт

Страница: 9 / 69

Tel: 886. 909 602 109 Email: sales@salukitec.com
www.salukitec.com
9
Measurement amplifier (Option 400, S80 is needed)
S3602E-008 Pulse Measurement For pulse S-parameter measurement
S3602E-480
Four-port Spread Spectrum
System Cable
Required connection cable for four-port vector
network analyzer when directly building a spread
spectrum system.
S3602E-S05
S-parameter Signal Integrity
Analysis
Used to display the frequency domain characteristics
and time domain TDR characteristics of the system.
Built-in crosstalk evaluation modules such as
NEXT, FEXT, PSXT, ILD, ICR and ICN. Built-in
standards such as IEEE 802.3, PCIe, SAS and
SATA help to quickly evaluate whether S
parameters Meet the design requirements. Can
automatically convert the software graphic curve
into Word or PPT report. Support a variety of Dk/Df
extraction methods. Support NRZ, PAM-4 eye
diagram drawing function.
S3602E-S06
MiliMeter Extension Port Power
Control
Special for Saluki VNA. Suitable for extension
modules with power adjustable function such as
3643P S-parameter extension module.
S3602E-S07
AFR Automatic Fixture
Removal Option Used for automatic testing and removal of single-
ended and balanced device measurement fixtures.
S3602E-S10 Time Domain Measurement
For time-domain test, can locate and analyze the
discontinuous positions in devices, fixtures or
cables.
S3602E-S11
Advanced Time Domain
Analysis
Used for TDR time domain impedance test, eye
diagram analysis, etc.. S10 option is included in
S11.
S3602E-S80 Frequency Offset Measurement
For frequency offset measurement. millimeter-wave
frequency extension main unit needs this option
S3602E-S82 Mixer Scalar Measurement
For the scalar parameter measurement of mixers
(Option 400, S80 is needed)
S3602E-S83 Mixer Vector Measurement
For the vector parameter measurement of mixers
(Option 400, S80 is needed)
S3602E-S84
Embedded LO Frequency
Converter Measurement For the measurement of embedded LO frequency
converters (Option 400, S82 or S83, S80 are needed)
S3602E-S86
Gain Compression Two-
Dimension Sweep Measurement For the gain compression two-dimension sweep test
of amplifier
S3602E-S88 Phase Scan Option
Used for phase scan measurement (need option
S3602E-400)
31128 1.85mm Calibration Kit For calibration of the VNA
SCAVNA67FM-
(1.85/1.85)
1.85mm Test Cable
For measurement of the analyzer, 1.85mm (female)
to 1.85mm (male)
SCAVNA67FF- 1.85mm Test Cable For measurement of the analyzer, 1.85mm (female)