Tel: 886. 909 602 109 Email: [email protected]
22
Function key zone include 4 function keys on the left side of the screen as shown in Fig. 3-6.
Fig. 3-6: Function Key Zone of S3602
a)
[Help] key
Open the main help menu. Following options will be displayed on screen: “User manual”, “Programming manual”,
“Technical support”, “Error information” and “About”.
b)
[Record/run] key
It is a shortcut key to enable the recording/running function of the analyzer. Press the key to automatically start
recording. If recording is completed, press this key to automatically start running. This key is only effective for
Record/Run 1, and cannot be used to control Record/Run 2.
c)
[Macro/local] key
If the analyzer is programmed, press this key to switch to the macro state. If the analyzer is not programmed, press this
key to open the macro menu.
d)
[Preset]key
It is a shortcut key to reset the analyzer. If the user has saved the reset state and tick the item “Enable user reset state”,
press this key to recover the state saved by the user; otherwise, the system reset state will be recovered.
6)
USB Interface
The USB interface can be connected with the keyboard, mouse and other USB devices. The front panel is equipped with
four USB interfaces in total and conforms to the USB2.0 specifications. The interface jack is of A type (four embedded
contacts; Contact 1 on the left side).
Fig. 3-7: USB Interface
7)
Display screen
Содержание S3602 Series
Страница 1: ...S3602 Series Vector Network Analyzer Quick Start Guide Saluki Technology Inc...
Страница 30: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 30 Fig 3 24 Use of Torque Wrench...
Страница 33: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 33 Fig 4 4 System Recovery Screen...
