Saluki S3602 Series, Быстрый старт

Страница: 51 / 69

Tel: 886. 909 602 109 Email: sales@salukitec.com
www.salukitec.com
51
Fig. 6-12 Segment Insertion and Deletion
4)
Editing of segment table

Double-click the [State] box of the segment and select “ON” or “OFF” to open or close the segment.

Double-click the [Starting Stimulus] box of the segment and enter the starting frequency of the segment.

Double-click the [Ending Stimulus] box of the segment and enter the ending frequency of the segment.

Double-click the [Number of Sweep points] box of the segment and enter the number of Sweep points of the
segment.

Double-click the [Power level] box of the segment and enter the power level of the segment (the
independent power level option is opened).

Double-click the [Intermediate frequency bandwidth] box of the segment and enter the intermediate
frequency bandwidth of the segment (the intermediate frequency bandwidth option is opened).

Double-click the [Sweep time] box of the segment and set the Sweep time (the independent Sweep time
option is opened).
6.5.3 Sweep Time
After Setup of measurement, the minimum Sweep time will be adopted by the analyzer. The Sweep time can be
increased to meet certain requirements of measurement. If the Sweep time is set as 0, the minimum Sweep time
will be adopted automatically by the analyzer. If the Sweep is no less than 300ms, a Sweep indicator will be
displayed on the analyzer, indicating the point-to-point measurement Sweep. The measurement indicator is a small
upward arrow, showing the point at which measurement is just completed on the Trace.
1) Setup of Sweep time
Menu path:
[Stimulus] > [Sweep] > [Sweep time...]
. The dialog box of
Sweep time
will appear.
Enter the Sweep time directly in the [Sweep time] box. For Setup of the Sweep time with the keys and
auxiliary menu bar, directly enter the Sweep time in the input toolbar.