Tel: 886. 909 602 109 Email: [email protected]
50
Fig. 6-10 Setup of Linear Frequency Sweep Type
2)
Setup of segment Sweep type
Menu path:
[Stimulus] > [Sweep] > [Sweep type].
Auxiliary menu bar: click
[Segment Sweep]
or select
[Segment Sweep]
in the [Setup type] dialog box.
Fig. 6-11 Setup of Segment Sweep Type
Dialog box Setup instructions:
[Independent power levels]
check box: tick it to set the independent power level of each segment. In this
case, the attenuator Setups must be identical.
[Independent IF Bandwidth]
check box: tick it to set the independent intermediate frequency bandwidth
of each segment.
[Independent Sweep time]
check box: tick it to set the independent Sweep time of each segment.
[Display table]
button: click it to create and edit the Sweep table.
[Hide table]
button: click it to hide the segment Sweep table.
3)
Segment insertion and deletion
Only the displayed segment table can be edited.
Menu path:
[Stimulus] > [Sweep] > [Segment table] > [Show table]
. The
segment table
sub-menu will appear.
Tick
[Show table]
in the
segment table
sub-menu. Click
[Insert segment]
in the
segment table
sub- menu to add
a new segment in front of the selected segment. Click
[Delete segment]
in the
segment table
sub- menu to
delete the selected segment. Click
[Delete all]
to delete the whole segment table.
Содержание S3602 Series
Страница 1: ...S3602 Series Vector Network Analyzer Quick Start Guide Saluki Technology Inc...
Страница 30: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 30 Fig 3 24 Use of Torque Wrench...
Страница 33: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 33 Fig 4 4 System Recovery Screen...
