Tel: 886. 909 602 109 Email: [email protected]
37
5.1.3 Table Area
1)
Display the cursor, limit and segment table so that the user can observe and modify the Setups (except the
cursor table). The list is displayed in the lower part of the window. Only one table can be displayed in each
window.
a) Cursor table
Fig. 6-28 Cursor Table
The cursor table is used to display the cursor parameters, including:
Cursor number
Reference cursor (for relative measurement)
Stimulus value
Response value
b) Limit table
Fig. 6-29 Limit Table
The limit table is used to display, set and modify the limit test parameters, including:
Type (minimum, maximum or closed)
Starting and ending Stimulus value
Starting and ending response value
c) Segment table
Fig. 6-30 Segment Table
The segment table is used to display, set and modify the segment sweep parameters, including:
Status(ON/OFF)
Starting and ending Stimulus value
Number of sweep points
Power level (separately set for each segment)
Intermediate frequency bandwidth (separately set for each segment)
Sweep time (separately set for each segment)
Содержание S3602 Series
Страница 1: ...S3602 Series Vector Network Analyzer Quick Start Guide Saluki Technology Inc...
Страница 30: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 30 Fig 3 24 Use of Torque Wrench...
Страница 33: ...Tel 886 909 602 109 Email sales salukitec com www salukitec com 33 Fig 4 4 System Recovery Screen...
